| REMARK: |
Principles:
The powder raw material and adhesive in a cylinder are mixed fully at the bottom to become a humid soft rnaterial, Then it is cut through high-speed crusher and becorne uniform granules.
Features:
1 The machine adopts horizontal cylinder structure. lts structure is reasonabIe.
2 Use air filIed seal shaft to drive. When washing. it can be taken place with water,
3 Use fluidization to Granulate and the granuIe is near ball, lts flow is good.
4 Compared the traditional process. 25% of adhesive can be reduced and the laying time can be shorted.
5 The tirne of rnixing in dry is 2 minutes and the time of g ranulating is 1 -4 minutes. Compared with the traditional process. 4-5 tirnes of efficiency is raised,
6 ln the same sealed container, dry mixing, hurnidity mixing and granulating can be finished. lt is in conformity with the requirements of GMP,
7 The whole operation has StriCt safe and protective
Technical Parameters:
|
Name |
Type |
|
10 |
50 |
150 |
200 |
250 |
300 |
400 |
600 |
|
Capacity(l) |
10 |
50 |
150 |
200 |
250 |
300 |
400 |
600 |
|
Output(kg/batch) |
3 |
15 |
50 |
80 |
100 |
130 |
200 |
280 |
|
Admix speed(r.p.m) |
300/600 |
200/400 |
180/270/ |
180/270 |
180/270 |
140/220 |
106/155 |
80/120 |
|
Admix power(kw) |
1.5/2.2 |
4/5.5 |
6.5/8 |
9/11 |
9/11 |
13/16 |
18.5/22 |
22/30 |
|
Incise speed(r.p.m) |
1500/3000 |
1500/3000 |
1500/3000 |
1500/3000 |
1500/3000 |
1500/3000 |
1500/3000 |
1500/3000 |
|
Incise power(kw) |
0.85/1.1 |
1.3/1.8 |
2.4/3 |
4.5/5.5 |
4.5/5.5 |
4.5/5.5 |
6.5/8 |
9/11 |
|
Pressure air amount(m3/min) |
0.6 |
0.6 |
0.9 |
0.9 |
0.9 |
1.1 |
1.5 |
1.8 | |
